How to Tell if Mac is Using 802.11ac, 802.11n or Other Wi-Fi Protocol

How to Tell if Mac is Using 802.11ac, 802.11n or Other Wi-Fi Protocol

Most users connect a Mac to a wi-fi network and dont think too much about which 802.11 wi-fi band protocol is in use, but many advanced users and network administrators do want to know which 802.11 wireless standard is in use. Typically someone would want to know which wi-fi PHY standard is in use to insure speed optimization and coverage range, as each wireless standard is different, with differing ranges and offering different WLAN connection speeds. This article will show you how to determine if a Mac is currently using 802.11a, 802.11b, 802.11g, 802.11n, or 802.11ac to connect to a particular router.

Additionally, well show you how to check which wifi modes a Mac wireless card supports, and also show you how to check which version protocol of 802.11 is in use on other nearby routers. The simplest way to determine the 802.11 protocol of a network is to , where you will find band PHY mode and other information. The following tips work the same on virtually every vaguely modern version of Mac OS and Mac OS X.

You can check which wireless protocol is currently in use on just about every modern Mac as long as it has a wi-fi NIC that is actively in use. Heres all you need to do: In the example here, the current router is using the 802.11n protocol, as you can see the protocol next to PHY Mode (For the curious, PHY is short for physical layer, referring to the lowest level of the OSI communications model). Depending on your router and the Mac network card, you may see 802.11a, 802.11ac, 802.11b, 802.11n, 802.11g, or perhaps another variation like 802.11ay or az if youre living in an electrical engineer WLAN lab or somewhere in the future. You can also determine with this same trick.

You can also determine what other wifi modes are in use with other nearby routers if they are in range, even if the Mac is not connected to them. This trick can be particularly helpful if your router is dual-band (or greater) and you want to know which 802.11 protocol the SSID is using before connecting to it. For example, some routers may broadcast multiple networks, say an 802.11ac along with an 802.11g, but you might want to connect only to the 802.11ac broadcast. Of course you might also want to know what WLAN modes and protocols your Mac wi-fi card actually supports and what it can connect to. This will let you know if a Mac WLAN NIC is compatible with a particular wifi mode. Fortunately Mac OS stores these details within the System Information app. You will see something like Supported PHY Modes: 802.11 a/b/g/n/ac which indicates each of those 802.11 protocols is available for that particular wireless card to use. Those interested can read more about , its technical, geeky and likely not particularly relevant to average users, but if you like to know how the sausage is made or what the limitations are for particular WLAN modes, you may find it interesting. Do you know of any other interesting tips or tidbits regarding a Mac and compatible WLAN modes, protocols, and standards? Share with us in the comments!